The accessory basic hydraulic hose can be unique, just like your business. If your hose connector is also unique, you should know the following. Hydraulic joints are metal parts that connect objects together, so they must meet strict standards. They must work under the specific temperature, fluid and pressure experienced by the hose. Below, Hose Fittings And Adapters introduces the fittings of hose fittings.

1. Use a ring, gasket or ferrule to connect the hose to the compression fitting on the container.

2. The end of the flaring fitting is shaped like a cone or a flaring, and a container is inserted.

3. There are two types of end fittings: clip-on end fittings and ordinary fittings.

4. Threaded joints have metal grooves around them, called threads. Threaded joints are very common. They have male and female types, as long as the thread size is the same, they can be screwed together.

When do you need custom accessories? Companies acquire their equipment in a variety of ways. Sometimes you will inherit a well-used old hose, but its parts have long since disappeared from the market. Other times, the hose must be made from scratch because your business has unusual requirements. Maybe it needs to be extra long or wide to handle the load. The pipe fittings may differ from standard types of pipe fittings in terms of size, shape, thread size, and the number of connected hoses. It is important to match the old fittings exactly. The safety of your employees and the function of the hose depend on it. Hose joints are subject to a lot of pressure, which means that poorly manufactured or poorly assembled parts may be blown off at high speed, causing the hose to shake.

Through the above introduction, Wholesale Hose Fittings Company hope you can simply refer to the content of this article in future use.